Paint & Varnish Removers
Circa 1850 Soft•Strip is an alternative way to effectively remove paint, varnish, shellac, lacquer and polyurethane from all your fine furniture, woodwork and metal. With its pleasant odour, Circa 1850 Soft•Strip can easily be used indoors. Because it stays wet longer, you will see it remove multiple layers with ease. Soft•Strip does not contain any methylene chloride or NMP, is non-flammable and biodegradable.
Wear Circa 1850 Stripping Gloves and protective eyewear and work in a well ventilated area.
Protect work area with polyethylene or foil sheet.
If using on a surface other than wood, metal, or masonry, test a small area first.
Brush on a liberal amount of Circa 1850 Soft•Strip. Wait at least 15 minutes for the finish to bubble or dissolve. Keep area being stripped completely saturated with stripper. If stripper dries out, reapply to reactivate. Remove softened finish using the Circa 1850 Stripping Tool, paintbrush or a scraper. Use Circa 1850 Maple Scraper to avoid gouging wood surfaces. If finish is exceptionally thick and some residue remains, repeat the procedure. Remove finish residue with Circa 1850 Finishing Pads dipped in remover. When all the finish has been removed, wash down the surface with Klenk's Mineral Spirits, alcohol or water using Circa 1850 Finishing Pads. Allow surface to dry thoroughly prior to refinishing.
|Product Code: 1820|
|473 mL (1 pt)||6|
|1 L (1 qt)||6|
|4 L (1 gal)||2|
- PLEASANT ODOUR
- STAYS WET LONGER
- CONTAINS NO METHYLENE CHLORIDE OR NMP
- CLEAN UP: AIR DRY TOOLS, SCRAPE OFF RESIDUE
Our products are available at many retail locations. To find a store near you, please click on WHERE TO BUY.
No demonstration available.