Swing Paints

Forum Message

From Message
Ruth
Apr 08, 2021
11:27:39
Nu-luster 55 bar top epoxy over existing epoxy
Do I need to sand existing epoxy in center of live edge river table befor pouring nu-luster 55 bar top epoxy. If so what grit of sand paper.
Mark
Apr 08, 2021
13:02:43
Re: Nu-luster 55 bar top epoxy over existing epoxy
If the existing epoxy has cured for less than 5 days, sanding is not required. If necessary or desired, you may sand with 200 grit sandpaper to dull the surface and increase bonding.
Ruth
Apr 23, 2021
08:07:59
Re: Nu-luster 55 bar top epoxy over existing epoxy
How much sanding do you need to do flood coat over whole table. Seal coat has cured over five days ago. Have lightly sanded by hand with 220 but does it need further sanding so whole surface is dull ?
Mark
Apr 23, 2021
08:38:24
Re: Nu-luster 55 bar top epoxy over existing epoxy
Since you waited 5 days, you should dull the surface as best as possible to increase adhesion with the new pour. Even without sanding, you should obtain a firm bond between the seal coat and the pour coat.
colette Marcotte
May 19, 2021
14:18:22
Re: Nu-luster 55 bar top epoxy over existing epoxy
Il m'est arrivé un accident avec Nu-Lustre 55. En mélangeant mes produits, je me suis aperçu trop tard que la partie à mélanger était rendue en sucre après quelques gouttes. L'autre partie est déposée sur mon tableau et il ne semble pas sécher. Que me conseillez-vous pour ne pas perdre on oeuvre d'art, est-ce que cela va finir par sécher?
Mark
May 19, 2021
14:27:21
Re: Nu-luster 55 bar top epoxy over existing epoxy
Rendue en sucre??

New message:

:
:
:
:
: