Swing Paints

Bathtub Reglazing Epoxy

Klenk's Epoxy Enamel
Klenk's Epoxy Enamel

Klenk's Epoxy Enamel is an extremely hard and durable two-component epoxy for consumer and professional use. It is specially designed to restore the finish on tubs, sinks, toilets, ceramic wall tiles, and appliances. Klenk's Epoxy Enamel can be used on any hard, solvent-resistant surface, such as ceramic, metal, stone, marble, melamine, fiberglass, etc. Do not use on plastic or imitation marble, stove top ranges, or other surfaces subject to excessive heat. Always test surface with Klenk's Epoxy Thinner prior to use.

Klenk's Epoxy Enamel is available in three standard colours (White, Bone, Almond) as well as special order colours.

Directions

Provide adequate ventilation, protective eyewear and clothing. Maintain a minimum temperature of 24C, and low humidity. Clean surface thoroughly using Klenk's Tub & Tile Prep Kit and Klenk's Epoxy Thinner. Mix 1 part Epoxy Catalyst to 1 part Epoxy Paint and let stand for 1 hour. Brush or spray mixture onto surface. Apply a thin coat to avoid drips. If surface is dry, apply a second coat after 2-3 hours. If still tacky, store paint in freezer overnight and apply a second coat the next day. Apply a third coat if desired, or to cover dark colours. Wait at least 5 days before using painted surface.
Click here for detailed instructions.

More Info
Product Code: 8100
Size: Case Pack:
473 mL (pt) 4
946 mL (qt) 4

Choosing the Right Finish

  • TWO-COMPONENT EPOXY
  • ABRASION AND WATER RESISTANT
  • HARD EPOXY FINISH
  • HIGH GLOSS
  • MAX COVERAGE: 6m²/L (70ft²/qt)
  • CLEAN UP: EPOXY THINNER
Purchase

Our products are available at many retail locations. To find a store near you, please click on WHERE TO BUY.

You may also purchase our products using our online store by clicking BUY NOW CANADA or BUY NOW USA.

Return

Demonstrations