Antiquax Natural Beeswax is based on pure natural beeswax for use on previously sealed surfaces.
Using a clean cotton cloth or brush, apply the Beeswax in the direction of the wood grain where possible. To obtain a consistent finish, always wipe evenly, blending the Beeswax over the whole surface area by exerting a small degree of pressure when applying by hand. Take care to lightly remove any excess Beeswax immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern. Leave dry for around 10 minutes, and buff to a finish using the Antiquax Polishing Cloth.
|Product Code: 1621|
Our products are available at many retail locations. To find a store near you, please click on WHERE TO BUY.
No demonstration available.